Construction Materials

Estimate wall bricks, waste, mortar volume, bags and cost from verified brick and joint dimensions.

Concrete, cinder block and CMU calculator for wall takeoffs, openings, waste, mortar, grout/core fill, rebar, pallets and costs.

Calculate geometric concrete volume and an order allowance for slabs, footings, cylindrical posts and direct volume entries.

Estimate rebar grid counts, total length, stock bars and weight from drawing-specified spacing and cover.

Estimate asphalt paving-mix tonnage and, separately, its bitumen-binder portion, layers, coverage, costs and truckloads.

Estimate crushed stone and stone tonnage from project dimensions, depth and an editable bulk density.

Estimate crusher run volume, tonnage, loads and cost for a measured base using explicit density and ordering assumptions.

Convert cubic yards and short tons in either direction using an explicit, editable material bulk density.

Plan aggregate base and bedding sand as separate material orders for a patio, walkway or paver driveway.

Estimate pea gravel volume, tonnage, bag count and cost from dimensions, depth and editable supplier assumptions.

Estimate polymeric sand bags from label coverage ranges or rectangular-paver joint volume and entered bag yield, with multiple zones, allowance and cost.

Estimate river rock or river stone in yards, tons, bags and loads with visible density and allowance assumptions.

Estimate drywall sheets for multiple walls and ceilings. Compare sheet sizes, net-area and surface-grid counts, openings, layers, waste and cost.

Estimate lumber boards, purchased length, board feet and optional cost for linear requirements or surface coverage.

Estimate wall studs and plate stock from wall length, spacing, openings and editable framing allowances.

Estimate construction materials from area, wall dimensions, volume, linear length or item count, including waste and package rounding.

Calculate linear feet from pieces, runs, perimeter or area, then estimate stock pieces and cost per foot.

Measure square footage for multiple rectangles, circles, triangles, trapezoids and L-shaped rooms, with deductions, material allowance and optional cost.